The motor on the mesh belt equiped with manual speed control device , can adjust belt driving speed. the mesh belt speed is within 0.5-2.5m/min.
The stir blowers used to stir heat in the incubator so that can keep the uniform drying.
There are two heating ways, one is steam heat, another is natural gas heat.
For gas heating there are two gas portals,for steam heat there is steam pipe portal. To avoid over heat suggest the temperature control within 80-140 ℃
The heating capacity depends on mesh belt speed, heating method and heating temperature, estimate capacity is 350-750kg/h.
In mesh belt dryer system, the following data can be special set and adjusted in order to achieve best drying effect: heating temperature,air flow,staying time.Agility specified : we can add mesh belt washing system and product cooling system in mesh belt dryer system.Agility operating: after conveying on mesh belt, wet material is dried in a total sealed chamber during whole drying process. Working condition is good because the system do not have powder leaking out side. When wet material loaded in conveying belt, relative position between each single material is quite stable.
Copyright © 2017 - 2021Spaghetti Straws Making Machine Manufacture All Rights Reserved